Technical Articles Articles

Lessons Learned from Mooring Operations: Closing the Gap Between Perception and Reality

By Peter Farthing, Managing Director, Sensor Technologies Ltd; CEO, Advantec Group Limited Mooring operations are among the most routine activities in the maritime industry, yet they remain associated with serious safety incidents. Mooring line failures can contribute...

Offshore Module Installation

By Alan Crowle, BSc, MSc, MScbyRes, CEng, CMarEng, FRINA, FMAREST, FSCMS University of Exeter, College of Engineering, Renewable Energy Group Email ac1080@exeter.ac.uk IntroductionThis article investigates the marine design aspects of large offshore modules for use in...

Aspects of Passenger Movement to the Same Side in the Assessment of Intact Stability

By João Henrique Volpini Mattos Introduction The main static stability rule governing the grouping of passengers on the same side is that the heel angle cannot exceed a certain value, in addition to various other stability criteria (minimum GM, minimum flooding angle,...

Lifting Steel Jackets

By Alan Crowle, BSc, MSc, MScbyRes, CEng, CMarEng, FRINA, FMAREST, FSCMS University of Exeter, College of Engineering, Renewable Energy Group Email: ac1080@exeter.ac.uk Introduction The fixed steel jacket is the most common type of structure used for supporting...
Offshore Module Installation

Offshore Module Installation

By Alan Crowle, BSc, MSc, MScbyRes, CEng, CMarEng, FRINA, FMAREST, FSCMS University of Exeter, College of Engineering,...

Lifting Steel Jackets

Lifting Steel Jackets

By Alan Crowle, BSc, MSc, MScbyRes, CEng, CMarEng, FRINA, FMAREST, FSCMS University of Exeter, College of Engineering,...